Overview :
● LiDAR is an acronym for Light Detection and Ranging.
● In LiDAR, laser light is sent from a source (transmitter) and reflected from objects in the scene.
● The reflected light is detected by the system receiver and the time of flight (TOF) is used to develop a distance map of the objects in the scene.
● The LiDAR can be employed in detecting and ranging in many applications such as
➢ Robot navigation and obstacle avoidance
➢ Robot ROS teaching and research
➢ Regional security
➢ Environmental scanning and 3D reconstruction
➢ Navigation and obstacle avoidance of home robots/ robot vacuum cleaner
LIDAR Development Kit :
Device Connection :
Connect the USB adapter with X2-LiDAR and USB Adapter board
Connect the C-type cable to DATA port of USB adapter to Computer
Place the LiDAR kit in the Zero direction to get a proper direction output
Driver Requirement :
● USB adapter board need to be installed of this kit adopts CP2102 chip to realize serial port (UART) to USB signal conversion
● Driver can be downloaded from the official website of Silicon Labs
CP210x USB to UART Bridge VCP Drivers - Silicon Labs (silabs.com)
● The Highlighted file should be downloaded
● Unzip the driver package, run the CP2102's Windows driver installation file (exe file under CP210x_VCP_Windows).
● Select the 32-bit version (x86) or 64-bit version (x64) installation program according to the version of the windows operating system
● Click finish to complete the installation
● Connect the X2-LiDAR with the USB port of your computer
● Go to ->Device Manager -> Port (Silicon Labs CP210x USB to UART bridge(COM X))
LiDAR Software :
● Software link is provided by the manufacturer [YDLiDAR]
Downloads & Support_YDLIDAR|Focus on lidar sensor solutions
● Extract the LiDAR Viewer .zip file for accessing the
● LiDAR Viewer-V0.3.5 application will be available.
● Open the app to access the file -> user manual will be opened
● Bottom left corner you can find the language selection and you can select the OK available at bottom right corner
● The Application LiDAR Viewer-V0.3.5 will be opened
● Connect the LiDAR to get the COM port and select the device model – X2
● Once you connect to the PORT, the LiDAR starts rotating with a minimum speed
● To start the LiDAR process, press the PLAY button placed on top left-hand corner side available on the window, the speed of rotation increases
● Once you press the connect, the application will connect with the LiDAR, which increases the speed of the LiDAR
● The output of the LiDAR can be visualized in the application window
● It senses the accurate distance in the meters
● LiDAR output of your environment is displayed in the window
● The dots will represent the obstacles
● If some object moves in the LiDAR activated environment, then object movement will be sensed in the form of dots
● By moving the cursor you can get the exact position of the object in meters
Troubleshooting :
● If the port of the device is disconnected, the radar port wont be available
● If you plugin once again the device will get autoconnected.